|
|
Post by SeaRat on Feb 10, 2019 13:36:59 GMT -8
TD- I have a couple of DAAMs with Cyclone first stages in them. I use a banjo fitting with them for an SPG. I have found that several of my valves are too wide (front to back) to allow use of a banjo. I have 2 New England Divers tanks with, I believe, Healthways valves and I cant use the banjo with them. The USD valves are no problem. Do a test fit before you put the valve in the tank and have it filled. For those valves witha tightf fit, have you tried putting the Aquamaster over the valve, but lower, then fitting the Banjo into the valve, and finally bringing the Aquamaster up over the inserted banjo fitting and then finally tightening down the yolk? I have found this to work on some valves. John |
|
|
|
Post by snark3 on Feb 10, 2019 19:50:46 GMT -8
I have not tried this, but I certainly will. I'd love to be able to use my DAAM's with more tanks.
|
|
