|
Post by snark3 on Mar 14, 2020 12:46:05 GMT -8
When I wasn't playing with the Hydro Twin II I managed to save another double hose. In the infamous "box of junk" there was some cans and bodies. There was a DAAM body can and body with no first or second stage. I put a Phoenix first, and an HPR second in it. It locked up fine, I set the IP and it held perfectly. There was no DAAM exhaust can, but there was a DA Navy approved and a Mistral exhaust can. I put a duckbill eliminator in the Navy approved can, put it together with the green hoses I removed from a Snark3 (in favor of blue) Now I'm looking forward to getting this reg wet.
I'm calling this a Phoenix-HPR-DBE-DA Aqua Navy Approved
|
|
|
Post by nikeajax on Mar 14, 2020 14:26:53 GMT -8
...There was a DAAM body can and body with no first or second stage... OK, now that, I can approve of Carry on sailor... Jaybird
|
|
|
Post by vance on Mar 14, 2020 16:44:27 GMT -8
Any DH saved is a good thing!
|
|
|
Post by vance on Mar 14, 2020 16:48:24 GMT -8
When I wasn't playing with the Hydro Twin II I managed to save another double hose. In the infamous "box of junk" there was some cans and bodies. There was a DAAM body can and body with no first or second stage. I put a Phoenix first, and an HPR second in it. It locked up fine, I set the IP and it held perfectly. There was no DAAM exhaust can, but there was a DA Navy approved and a Mistral exhaust can. I put a duckbill eliminator in the Navy approved can, put it together with the green hoses I removed from a Snark3 (in favor of blue) Now I'm looking forward to getting this reg wet. I'm calling this a Phoenix-HPR-DBE-DA Aqua Navy Approved The Phohprdaamnav rev1?
|
|
|
Post by snark3 on Mar 14, 2020 18:48:31 GMT -8
There are still more parts in that box of junk I might be able to make another reg, plus there's a complete DAAM minus the LP diaphragm. That may be my next DH project. The one that got run over I think is beyond my metal working abilities.
|
|
|
Post by nikeajax on Mar 15, 2020 14:46:36 GMT -8
Skip, l'me know if'n ya want to print a custom label for 'em: I'll do some artwork for ya JB
|
|
|
Post by snark3 on Mar 16, 2020 10:34:16 GMT -8
Thanks JB I'll keep that in mind.
|
|