alx
New Member
Posts: 9 
|
Post by alx on Oct 22, 2014 4:27:22 GMT -8
I recently got two old Barracuda Zyklomat II, anyone knows where to get spare parts for revisioning for old Barracuda stuff?
|
|
|
|
Post by scubadiverbob on Oct 22, 2014 22:33:07 GMT -8
|
|
|
|
Post by scubadiverbob on Oct 22, 2014 22:39:30 GMT -8
|
|
|
|
Post by regulator68bj on Oct 23, 2014 3:03:50 GMT -8
The "Zyklomat 11" is marketed in Germany by "Barracuda" is a "rebadged" "Nemrod Ibiza" (Seamless) unit.
john |
|
alx
New Member
Posts: 9
|
Post by alx on Oct 23, 2014 4:37:59 GMT -8
Thanks for this info, that is interesting. Any idea where to get part fot the Nemrod Ibiza regulators? I checked th pics I found on the web, you are right, it's really 1:1 the same like the one Baracuda sold, just with another label. Interesting, I knew Baracuda was reselling but I wasn't aware they resold nemrod.
|
|
|
|
Post by vintagefrank on Oct 23, 2014 13:02:04 GMT -8
Hi Alx,
Barakuda was owned by the same Company (Metzeler) as Nemrod (Spain). Seamless (USA) produced under license of Nemrod. For some time, Barakuda sold spanish Nemrod Regs under their Name - not the US regs (Ibiza was produced by Seamless). I have possibly parts for you - depends on what you need.
best regards from cold Germany
Frank
|
|
|
|
Post by denhelder0 on Oct 28, 2014 14:39:27 GMT -8
Hello Alx,
If Frank you not can help.
I have a lot of NEMROD spare parts I can look for you.
Regards,
Kees
|
|
alx
New Member
Posts: 9
|
Post by alx on Nov 14, 2014 1:29:07 GMT -8
So far the cleaning went well, the membran is all ok and still looks very good as my Zyklomat II were never used as it seems. All other o-rings etc were replaced.
Anyone knows the preasure settings? I need to adjust the 1st stage correctly.
|
|
|
|
Post by regulator68bj on Nov 14, 2014 6:22:54 GMT -8
alx The "Interstage" Pressure setting is 110psi
|
|
|
|
Post by Nemo on Nov 14, 2014 18:46:36 GMT -8
That's what I like about this Group. Whereas I have been in groups where I felt like I was trying to reason with drunks in a bar; VSS is a place where you can actually get answers from people who are here because they really are into the genre and not just looking for a place to hang out and talk schnit. Bravo, ladies and gentlemen. I salute you. :-)
|
|
|
|
Post by SeaRat on Nov 14, 2014 22:36:09 GMT -8
I have been reading with interest, but have little to contribute as I've never even seen this regulator. How well does in breathe?
John
|
|
alx
New Member
Posts: 9
|
Post by alx on Nov 15, 2014 2:34:12 GMT -8
regulator68bj: Thanks a lot! So far it feels very good outside the water, once it is done I will take it out for a testdive. Compared to current gen regulators it's pretty high quality assembly, I was stunned.
|
|
