|
Knife
Jul 15, 2007 9:34:16 GMT -8
Post by hardin on Jul 15, 2007 9:34:16 GMT -8
Does anyone know how the butt end of the old Scubapro dive knife - the big ugly one that came in a sheath with a cover over the end versus a reatainer type "o-ring" - comes off or is attached to the knife. I have one that is loose & I want to tighten it up. Also - how is the butt on the Voit Swimmaster attached. This is the older Swimmaster that came with a serial number etched into the hand guard. I would appreciate any info as I don't want to tear anything up further in order to repair - tighten these butt caps. Appreciate it!! Grady
|
|
|
Knife
Jul 17, 2007 8:35:43 GMT -8
Post by luis on Jul 17, 2007 8:35:43 GMT -8
Does anyone know how the butt end of the old Scubapro dive knife - the big ugly one that came in a sheath with a cover over the end versus a reatainer type "o-ring" - comes off or is attached to the knife. I have one that is loose & I want to tighten it up. Grady It is threaded. I have one that is also loose. I can just unscrew it. I need to clean the threads and just put some Locktite in them.
|
|
dbg40
Senior Diver
Posts: 66
|
Knife
Jul 17, 2007 11:54:10 GMT -8
Post by dbg40 on Jul 17, 2007 11:54:10 GMT -8
I had one a long time ago the did that. The tang seemed to be too long for the handle. I ended up cutting the threads a little further down, and filing the tang a little shorter after.
|
|