|
Post by Bryan on May 4, 2004 5:09:43 GMT -8
HELP! I need some info on this beauty if any is around. Typical German engineering. Way overdone but very nicely done. It is called a Duomat and about all I can tell about it is it was made around 1968 or so. The mouthpiece and check valves screw on and off like a Spiro double hose or Drager rebreather.... I believe all this one will need is a main diaphragm. If anyone has any leads or perhaps any overseas contacts that could help out on locating a tech or parts diagram and perhaps a good used diaphragm that woudl be great!! Thank you
|
|
|
Post by pearldiver on May 4, 2004 5:17:14 GMT -8
The parts might.....just might I say, interchange with the MEDI. Not positive...but take a look.
|
|
|
Post by pearldiver on May 4, 2004 5:27:59 GMT -8
PS: Type in MEDI Tauchen. Or Tauchetchnik-Medi-Regler THere are parts breakdowns on it. See if that is what you have.
|
|
|
Post by Bryan on May 4, 2004 5:50:10 GMT -8
Thank you very much for the lead but it appears the Duomat is quite a bit different on the inside. The diaphragm has a metal cone shaped center and the actuating lever has a nylon ball on it that rides in the center of the cone.....I"m going to E-mail some of the people on the Medi pages to see if they can give me some leads.
|
|