|
|
Post by AnthonyM on Jun 6, 2005 9:37:14 GMT -8
Trying to make a replica of the "Triple 44 tank Block" and was wondering if anyone had any info on specs  |
|
|
|
Post by sea.explorer on Jun 6, 2005 11:00:57 GMT -8
Contact dan@vintagescubasupply.com directly. That is probably your best bet. I would be interested in hearing more about your project as it progresses. Good luck! -Ryan
|
|
|
|
Post by SeaRat on Jun 8, 2005 17:52:56 GMT -8
Antonio,
The LDS here has a set of triple tanks, USD, with bands. They refuse to remove the valve, and get them hydroed as they feel it would compromise the tanks. I put an old USD harness on it, but it is only for display. If you want, I can get some info off these tanks for you.
On another note, I'm sorry to report that my cold went to my sinouses and lungs, and I won't be able to join you this weekend for the vintage dive.
John
|
|
|
|
Post by AnthonyM on Jun 9, 2005 20:02:57 GMT -8
What I'm mainly looking for is the spacing between the tanks, the amount of material needed for the bands, and the thickness of the bands. Also, does anyone know where my best bet would be to get a tripple tank manifold that fits modern tanks as the originals, and the tanks to go with, are almost immpossible to find? P.S. Sorry about the cold Sea Rat. Was really looking foward to meeting you this weekend  , but we always have the Clear Lake trip this July  . Hope you get well soon. |
|
, but we always have the Clear Lake trip this July 
. Hope you get well soon.
