dead_dog
Senior Diver
It's what we learn after we know it all that counts. John Wooden
Posts: 79 
|
Post by dead_dog on May 16, 2020 17:13:07 GMT -8
I'm looking for two dip tubes for a US Divers tank valve.
I will pay a fair price for the two.
Thanks, Bill
|
|
|
|
Post by SeaRat on May 18, 2020 10:12:06 GMT -8
I'll look at my valves. I think you want the ones that screw in, not the brazed ones; is that a correct assumption.
Please go to our photographic forum and post about the Underwater Photographic Society. I'm pretty sure there are others who want to know more about it than just me.
John
|
|
dead_dog
Senior Diver
It's what we learn after we know it all that counts. John Wooden
Posts: 79
|
Post by dead_dog on May 20, 2020 16:28:35 GMT -8
I'll look at my valves. I think you want the ones that screw in, not the brazed ones; is that a correct assumption. John Yes, John, that's right. I need the screw in ones. |
|
|
|
Post by SeaRat on May 24, 2020 15:33:54 GMT -8
Dead_Dog,
I have one manifold with only one screw-in dip tube. That one is availed. I have one other manifold with both, but I hesitate to break it up.
John
|
|
dead_dog
Senior Diver
It's what we learn after we know it all that counts. John Wooden
Posts: 79
|
Post by dead_dog on May 24, 2020 22:10:29 GMT -8
I need any amount of dip tubes. How much do you want for the one you have?
Thanks,
Bill
|
|
|
|
Post by herman on May 25, 2020 6:04:24 GMT -8
If you need a bunch of them, maybe just buying some brass tubing and a die to make your own would be the best alternative.
|
|
dead_dog
Senior Diver
It's what we learn after we know it all that counts. John Wooden
Posts: 79
|
Post by dead_dog on Jun 11, 2020 18:40:10 GMT -8
Thanks to all who posted. I got what I was looking for from China.
Bill
|
|
