Post by duckbill on Oct 18, 2005 11:50:14 GMT -8
I am trying to get a Voit MR-12 up and running and have run into an obstacle doing the second stage. The soft seat was no longer sealing, and once I figured out it was made of wax I think I figured out I could simply heat it to re-level the surface. Well, I made the mistake of trying to do it with a lighter flame and the wax got scorched and no longer able to flow into one mass.
Does anyone know what type of wax was used to make these seats? Or, what the formulation is?
Is it possible or prudent to simply remove the wax and substitute a rubber seat?
Does anyone know of a source for MR-12 second stage soft seats?
Any and all help would be very much appreciated. The first stage is rebuilt and ready to go!
Thanks.
Does anyone know what type of wax was used to make these seats? Or, what the formulation is?
Is it possible or prudent to simply remove the wax and substitute a rubber seat?
Does anyone know of a source for MR-12 second stage soft seats?
Any and all help would be very much appreciated. The first stage is rebuilt and ready to go!
Thanks.
