|
|
Post by Mike Nelson on Oct 26, 2005 16:28:09 GMT -8
Here goes....As I have mentioned in other postings, I have a Royal Aqua Master on Ebay....However, it is missing the ID plate on the reverse....I assume it is a Royal based on the yolk id stating Royal Aqua Master. This reg looks identical to my DA, with the exception of sn# locations....Is there a way I can positively id this as a Royal?.......Thanks.....Keith
|
|
|
|
Post by luis on Oct 26, 2005 16:50:21 GMT -8
The 1st stage nozzle body is about an 1/8” (actually about 0.11” ) longer for the Royal Aqua Master. The easy way to tell the difference is that the yoke in the DA Aqua Master only moves a little up and down when it is loose with no dust cap. In the case of the Royal the yoke can move that extra 1/8 of an inch. After you see them side by side you will notice that it is a big difference.
|
|
