dogfix
Regular Diver
Posts: 13
|
Post by dogfix on Jan 9, 2006 16:50:05 GMT -8
I have a Voit Swimaster Titan II. What is the standard IP for this model?
Has anyone posted a service manual for this? Where can I get parts?
Thanks!
|
|
|
|
Post by admin on Jan 12, 2006 10:32:24 GMT -8
The manual says that the Titan II IP should be set at 125 psi but boost it up to 145 psi for better performance (as long as your LP seat doesn't leak). You can replace the old HP rubber seat with a modern USD Conshelf one- they are interchangable as long as you also change the push pin also. A US Divers dealer should have these seats. Good luck.
Dan
|
|
|
|
Post by mossback on Jan 12, 2006 14:15:50 GMT -8
Dan
How many different brands of regulators use the same hp seat that is used in the Conshelf?
|
|
|
|
Post by admin on Jan 12, 2006 15:34:52 GMT -8
I'm not sure of all the different ones but some of them are the Voit Trieste, MR12, Titan II, many of the Mares first stages.
|
|
|
|
Post by mossback on Jan 12, 2006 19:42:33 GMT -8
So, would it be safe to say there is a company or companies out there somewhere that makes these parts for USD, MARES etc.........? Or does everyone buy from USD?
|
|
|
|
Post by admin on Jan 14, 2006 14:46:12 GMT -8
As far as I know, only the manufacturers make the HP seats for their own regulators. I don't think there are "aftermarket" HP seats like there are for mouthpieces or diaphragms. But I'm not in the modern retail scuba business and so I can only guess.....
|
|
