|
Post by Fibonacci on Oct 15, 2023 15:25:04 GMT -8
I'm now turning my attention to the Nemrod Snark LP diaphragm and exhaust valve. These were moulded from natural rubber, and are often found totally disintegrated on older 'Peacock' Snarks. I was able to get a NOS example of each to 3D model with a view to getting a run produced in food grade silicone rubber, which should improve WOB as well as having a greatly extended service life. The original diaphragm has a series of undercuts where the #202 plate fits, these should be able to be reproduced using a removable stripper plate on compression moulding. I have also reproduced the 'anti-stiction' stipples that were originally put in the OEM tool by hand! Will need to talk to suppliers... Nemrod Snark LP Diaphragm ASSY exploded by fibonacci101, on Flickr Nemrod Snark Exhaust Valve by fibonacci101, on Flickr
|
|
|
Post by vance on Oct 15, 2023 17:55:48 GMT -8
I love that you are looking toward the future with new replacement parts!
FYI, a USD single stage main diaphragm will fit the Snark. I don't know if there are any issues, but they seem to work. The Scuba Museum is offering new silicone exhaust valves. Also, the repro box rings fit as well.
I made a thread here about interchangeable parts a while back.
|
|
|
Post by Fibonacci on Oct 15, 2023 18:14:18 GMT -8
|
|
|
Post by spirou on Oct 16, 2023 9:39:08 GMT -8
IMG_20231016_192855_798 by Patrick Michel, sur Flickr IMG_20231016_180137_702 by Patrick Michel, sur Flickr I just fist finished this little guy, the exhaust valve was a bit tired so I put a new silicone from scuba museum, and same for the main diaphragm. I am surprised by strength of the second stage spring he is much stronger than the silver. The opening is smooth but not the same ventury assistance than the silver, for this fist try will be sure to have not free flow Cheer's Fred
|
|
|
Post by Fibonacci on Oct 16, 2023 13:25:56 GMT -8
spirou I just fist finished this little guy, the exhaust valve was a bit tired so I put a new silicone from scuba museum, and same for the main diaphragm.Which Scuba Museum main diaphragm best fits the Snark? Save me some more work so I can concentrate on the LP seats
|
|
|
Post by vance on Oct 17, 2023 11:57:36 GMT -8
USD single stage (also fits Kraken or regs with HPR).
|
|
|
Post by spirou on Oct 18, 2023 11:49:36 GMT -8
spirou I just fist finished this little guy, the exhaust valve was a bit tired so I put a new silicone from scuba museum, and same for the main diaphragm.Which Scuba Museum main diaphragm best fits the Snark? Save me some more work so I can concentrate on the LP seats Of course the blue 🔵 for single stage 😄😉 Fred
|
|