|
|
Post by Fibonacci on Oct 18, 2023 17:01:04 GMT -8
The original OEM Nemrod Snark service manual exploded views of the OPV are very low resolution and a bit hard to see. Here's an updated version!  OPV ASSY Exploded 3 by fibonacci101, on Flickr |
|
|
|
Post by spirou on Oct 19, 2023 6:43:09 GMT -8
|
|
|
|
Post by Fibonacci on Oct 19, 2023 14:15:01 GMT -8
Morning Fred
You are absolutely right, well spotted!
I had assembled the Peacock Snark some time ago and forgot to add the washers to the CAD.
Updated now...
|
|
|
|
Post by spirou on Oct 20, 2023 4:38:11 GMT -8
The original OEM Nemrod Snark service manual exploded views of the OPV are very low resolution and a bit hard to see. Here's an updated version! OPV ASSY Exploded 3 by fibonacci101, on Flickr Thanks a lot for this beautiful view. I t must be lots of work |
|
|
|
Post by vance on Oct 20, 2023 9:58:34 GMT -8
I just happen to have an OPRV that Snarky (Thanks, Skip!) sent me, sitting on my desk. I'll have to dig around in the Snark body to see what's in the hole. I think the washers and rubber seat are in there. If not, I'll find some washers and use an o'ring.
That new CAD drawing really helps! Thanks, Graeme!
|
|
|
|
Post by spirou on Oct 20, 2023 10:41:43 GMT -8
I just happen to have an OPRV that Snarky (Thanks, Skip!) sent me, sitting on my desk. I'll have to dig around in the Snark body to see what's in the hole. I think the washers and rubber seat are in there. If not, I'll find some washers and use an o'ring. That new CAD drawing really helps! Thanks, Graeme! Hello Phil, I use NBR 70 005 to replace the original rubber seat. Do you use the same? Cheer's Fred |
|
|
|
Post by vance on Oct 20, 2023 12:49:37 GMT -8
Yes, it works perfectly.
|
|
|
|
Post by Fibonacci on Oct 20, 2023 17:20:00 GMT -8
spirou said: Thanks a lot for this beautiful view. It must be lots of workGlad you found it useful, didn't take long to 3D model vs this first draft, which did   Snark III Sectioned 1 by fibonacci101, on Flickr
|
|
|
|
Post by vance on Oct 21, 2023 7:37:59 GMT -8
I don't know how you and James do this. I've tried, but can't get beyond the most basic steps.
|
|
|
|
Post by spirou on Oct 21, 2023 10:09:03 GMT -8
I don't know how you and James do this. I've tried, but can't get beyond the most basic steps. Me too😠|
|
|
|
Post by vance on Oct 21, 2023 13:36:10 GMT -8
I don't know how you and James do this. I've tried, but can't get beyond the most basic steps. Me too😠It's cool that no one has to cut a regulator in half to get a view like this anymore. Amazing! And thanks! |
|
|
|
Post by james1979 on Oct 22, 2023 11:13:05 GMT -8
I don't know how you and James do this. I've tried, but can't get beyond the most basic steps. I'm nowhere near Fibonacci's level at the modeling What I do is just enough for what I need to print.... what he's doing is pure functional artwork! |
|
|
|
Post by Fibonacci on Oct 22, 2023 15:11:36 GMT -8
Thanks but I am pretty much the Sorcerer's Apprentice for high end 3D CAD modelling, always calibrated and humbled when I look at some of my colleague's work using complex organic NURBS sufaces in the Studio. Once modelled you can section, explode, render to your hearts content... though high resolution photorealistic rendering still takes quite a bit of time using current techniques.  Snark III HP Side Assembled 1 by fibonacci101, on Flickr  Snark III HP Side Exploded 1 by fibonacci101, on Flickr  Snark III HP Side Exploded 1 Render by fibonacci101, on Flickr  Snark III HP Side Exploded 1 Line by fibonacci101, on Flickr One revolutionary breakthrough is Epic Games Unreal Engine 5, staggering levels of detail now possible in real time! This is turning the entire gaming and high-end visualisation markets on their head... www.unrealengine.com/en-USwww.unrealengine.com/en-US/solutions/automotive-transportationwww.unrealengine.com/en-US/featureswww.unrealengine.com/en-US/downloadTwin Motion is arguably the raw-bleeding-edge of what is currently possible at the High End entry level, and a gateway to Unreal Engine 5  www.twinmotion.com/en-USwww.twinmotion.com/en-US/solutions/product-designwww.twinmotion.com/en-US/featuresFree personal download, but the Commercial licence is only $499 (perpetual) www.twinmotion.com/en-US/license |
|
|
|
Post by james1979 on Oct 22, 2023 15:33:09 GMT -8
Yeah.... Uhhh... You kinda just proved my point, lol. What you're doing there is above my level (by quite a bit!).
It looks damn good, and I (suspect I speak for all of us) very much appreciate what you are doing!
Respectfully,
James
|
|
|
|
Post by Fibonacci on Oct 22, 2023 15:40:34 GMT -8
|
|
