USD Navy Approved Intermediate Level Rebuild Regulator
Jul 6, 2024 15:58:09 GMT -8
SeaRat likes this
Post by vance on Jul 6, 2024 15:58:09 GMT -8
Like the recent Mistral project I just had up, I have a nice USD Navy Approved rebuild project up for sale. I have rebuilt more than several Navys and I don't need to do the whole thing again! It's someone else's turn.
This one is very presentable cosmetically, but has scuffs and other shop rash from many years of service and storage. There is very little chrome loss. Label has paint loss, but is fixable. It's a very solid regulator.
I resurfaced the HP seat, assembled the nozzle, and it holds IP. I also dug out the old LP seat and glued in a new one. I did not replace the sintered filter, but it was cleaned. I am including a good OEM main diaphragm. I'd use it, but you might want to get a new silicone repro.
The reg has been reassembled so you will know where the parts go, but adjustments will need to be made. No hoseloop.
$180 + $15 shipping.
This one is very presentable cosmetically, but has scuffs and other shop rash from many years of service and storage. There is very little chrome loss. Label has paint loss, but is fixable. It's a very solid regulator.
I resurfaced the HP seat, assembled the nozzle, and it holds IP. I also dug out the old LP seat and glued in a new one. I did not replace the sintered filter, but it was cleaned. I am including a good OEM main diaphragm. I'd use it, but you might want to get a new silicone repro.
The reg has been reassembled so you will know where the parts go, but adjustments will need to be made. No hoseloop.
$180 + $15 shipping.
