|
|
Post by cherbie on Jul 11, 2024 16:41:34 GMT -8
I have a Cornelius compressor that takes a PC 1 filter. Old replacement was X592414 X-Pendable. Filter is 13.25" x 1.75". This Filter is no longer being manufactured.
Does anyone have a suggestion on an alternative Filter solution?
Thank you
|
|
|
|
Post by Seahuntjerry on Jul 11, 2024 18:46:39 GMT -8
someone will answer.If Not repack it your self!
|
|
|
|
Post by vance on Jul 12, 2024 7:51:14 GMT -8
A PM to Surflung (Eben) should get you some good advice!
|
|
|
|
Post by surflung on Jul 18, 2024 7:49:05 GMT -8
Sorry for my slow reply. The "PC1" label had me wondering if it was a Bauer compatible cartridge. The Bauer P21 cartridge is compatible with my Alkin Mariner W21 filteration system. I went to the Bauer website and found a chart with a "P1" but no references to dimensions, no photos, etc. - A few years ago I ordered a cheap two piece filter array from Ebay... Made in China. It has a condenser tube and a purification filter tube that accepts filter media cartridges. It's actually been a very good system. However, the cartridges that are available are not optimum for breathing air. Also hard to find. I ended up re-packing the cartridges with 13X Sieve, Hopcalite, and Activated carbon. Here's a link... Chinese Filter Array- Probably the most direct solution would be to re-pack your existing filter media. Filtertechs has all of the ingredients. Filtertechs Repack Supplies |
|
|
|
Post by surflung on Jul 18, 2024 11:18:25 GMT -8
Monoxycon = Hopcalite- Hopcalite/monoxycon converts Carbon Monoxide to Carbon Dioxide - I don't know if there is a recipe. I just look at the photos of the pre-packs and copy... 
|
|
