|
Post by denniscarman on Jul 16, 2006 9:37:30 GMT -8
Hello I have an at-pac that I just love. So easy to use.
In any case the seams on the inside bladder have finally decided to let go and open up. I need to find a place that can make a new bladder for the at- pac.
It doesn't owe me anything as I've used it for 30 years now. The only problem I have had with it, was when the power hose on the inside of the inflator tube slipped of and inflated my pac. That was the quickest trip to the surface I ever made.
Anyway any help would be appreciated
thanks Dennis
|
|
|
Post by diverdown1955 on Jul 17, 2006 6:10:19 GMT -8
Dennis, I have a Scubapro hardshell unit, two infact , that I treasure. In my concern, a few years back, I contacted Scubapro and they would bebuild the bladder for me should worse come to worst. A phone call to them may produce the results you want. You have the original for a pattern , how hard can it be. Perhaps they could direct you to someone able to replicate the bladder.
Good luck, Jerry diverdown1955
|
|
|
Post by denniscarman on Jul 17, 2006 21:20:21 GMT -8
Thanks Diverdown for the info.
I think I'll do that. I've even gotten the same material and have been pondering on rebuilding it myself. The only problem is the seal.
Dennis
|
|
JohnA
Pro Diver
Posts: 134
|
Post by JohnA on Jul 18, 2006 3:20:54 GMT -8
Divetek in Calif, they are the ones that now make the At-Pac, last I checked (last month) you will have to send the bladder to them and they will contact you with a price. That is what they told me.
Let me know if you need anything else, I started diving an At-Pac in 1978, still dive the bladder on a backplate. John
|
|