|
Post by Jose on Aug 12, 2006 19:06:15 GMT -8
Today I dove a converted UDS-1 Nemrod manifold set for the first time - its buoyancy should do well with a suit. Just picked up the tanks from the LDS after they passed tests and was told the O rings were leaking. I was able to reduce the leak but was still getting some from the one next to the J valve and to the right of main valve. Where can you find Nemrod manifold O rings? Thanks!
|
|
|
Post by luis on Aug 12, 2006 19:18:40 GMT -8
If it is just the O-rings you should be able to match them from your local hardware store. Many decent hardware stores carry imperial and metric O-rings. They will be your basic Buna-N rubber which is the most common O-rings for air service. You could also try: www.mcmaster.com/if you know the size.
|
|
|
Post by SeaRat on Aug 24, 2006 21:35:14 GMT -8
Jose,
This should be a nice setup for you. I think Luis has the best idea for the O-rings. I'm just curious what you are doing with the UDS-1 manifold, and any other of the UDS-1 items from this set of tanks?
John
|
|
|
Post by antiquated on Aug 27, 2006 13:13:14 GMT -8
Hi
What did you use for a thread insert on this system as I understand the UDS tanks are 1"+ thread size.
|
|