|
Post by herman on Jul 3, 2020 2:46:35 GMT -8
The gasket is the same one used on the DA Aquamaster and Royal AM, you can order them from VDH.
The gasket goes between the cans and the body (outside) NOT between the cans and the ring (inside). Sorry if this is obvious to you but I have seen a number of them under the ring on rebuilds I have done.
|
|
|
Post by crabbyjim on Jul 3, 2020 5:00:26 GMT -8
I am still confused about the can. The Fifty Fathom can is problematic with the Trieste but Scuba Museum also sells a can made specifically for the Trieste (http://www.thescubamuseum.com/Online%20Store/onlinestore.htm#!/FX-precut-Trieste-Titan-cans-Blue-Black-or-Green/p/68312907/category=20122116). I have the Trieste/FX cans and the Trieste drops right in.
|
|
|
Post by scubalawyer on Jul 3, 2020 6:14:52 GMT -8
I am still confused about the can. The Fifty Fathom can is problematic with the Trieste but Scuba Museum also sells a can made specifically for the Trieste.... I have the Trieste/FX cans and the Trieste drops right in. Hey Jim, what I was talking about is modifying a Mistral can by cutting out a hole with a tab that a Trieste/Titan II body can drop into (just like with your modified FX cans). M
|
|
|
Post by herman on Jul 3, 2020 8:29:54 GMT -8
I am still confused about the can. The Fifty Fathom can is problematic with the Trieste but Scuba Museum also sells a can made specifically for the Trieste (http://www.thescubamuseum.com/Online%20Store/onlinestore.htm#!/FX-precut-Trieste-Titan-cans-Blue-Black-or-Green/p/68312907/category=20122116). I have the Trieste/FX cans and the Trieste drops right in.
Wellll, kinda. The cans are simply the FX cans with the center cut out (round) so the body will fit.....I cut them for Rob so I am 100% sure of this. There is no alignment tab cut in those.
|
|
|
Help
Jul 3, 2020 10:10:08 GMT -8
Post by crabbyjim on Jul 3, 2020 10:10:08 GMT -8
I am no longer confused. I just looked at both of my Triestes. Thank you for your patience.
|
|