Experiments continue. My Voitmaster, with a new band clamp courtesy of Bryan and a Dacor 3-way courtesy of Russ:
As it stands, the splitter blocks the HP port. It doesn't bother me, since I use Dacor valves with HP ports. I may have an HP port adapter made to move the HP to the other side.
And, in related news:
This is a silicone mold of 1/4 of the Jet Air cases. The silicone worked extremely well. I only have 2 very minor fixes to make(shouldn't take much). I need to embed this mold into a slab of plaster for support, then make a matching mold for the other side of this half of the cases. Then do it all over again for the other case half.
I also experimented with a stronger casting wax last night. The silicone took the heat without issue, but the wax I have is not hard enough, and is easily damaged. the experiment continues....
There is another Dacor splitter, more a rectangle with outlets that go both directions, which does not block the HP port. I have one on my Trieste II. It works very well, and I would highly suggest it so that you can free up the HP port, and get a LP outlet in the other direction too. I don't have time right now to put close-up photos of it on-line, but by the weekend, I may be able to do so. I do have this photo, which is left-over from a discussion on cross-filling a cylinder and pressure checking to determine the size of the cylinder, which will show a bit of what I'm talking about:
John C. Ratliff Diving since 1959, at age 13. Haven't stopped, and still enjoy getting wet.