|
Post by vance on Jan 26, 2024 17:42:41 GMT -8
It is not the label on my new Snark! The photo shows the correct label, taken from CG-45.com. The one on my new reg is half rubbed off. I choose the same to begin, but I never finish 🤦. I'm not sure I understand. You were going to have some made, but didn't? Let's not duplicate the effort! If you want to have them made, lmk!
|
|
|
Post by spirou on Jan 26, 2024 21:43:48 GMT -8
I choose the same to begin, but I never finish 🤦. I'm not sure I understand. You were going to have some made, but didn't? Let's not duplicate the effort! If you want to have them made, lmk! Hello Phil It is that. I begin to work on the image, not completely finished, and the problem is also find printer for shiny effect for me, you do a perfect job on the healthways deluxe , so don't duplicate the job , I need 3 surely, that you send to me . Cheer's Fred
|
|
|
Post by vance on Jan 28, 2024 16:32:48 GMT -8
I have everything cleaned and the necessary parts needed for the rebuild. This one will come out very well, only having a small area of chrome loss inside.
These are very advanced 2 hose regulators as they have an HP tap for an SPG. They're excellent performers, and any serious vintage diver should have one.
Icing on the cake would be a Fibonacci LP adapter!
|
|
|
Post by vance on Jan 29, 2024 17:29:49 GMT -8
I'm not sure I understand. You were going to have some made, but didn't? Let's not duplicate the effort! If you want to have them made, lmk! Hello Phil It is that. I begin to work on the image, not completely finished, and the problem is also find printer for shiny effect for me, you do a perfect job on the healthways deluxe , so don't duplicate the job , I need 3 surely, that you send to me . Cheer's Fred I have to enlist JB on this one for the graphic, if there is enough interest. I need 1, you want 3, but I'll have to order 25. I'll bet Snarky could use some, and there must be other Silver owners out there who could use a fresh label.
|
|
|
Post by Fibonacci on Feb 11, 2024 14:06:46 GMT -8
Is anyone interested in a Silver reproduction label? I'm thinking about having some made. vance Enrique Dauner in Spain has had a run made using the same artwork, base stock and printer that did the original labels. He has at least two variations, I bought one of each. They are 100% accurate as they are not really reproductions, just another print run of the original labels!
|
|
|
Post by vance on Feb 11, 2024 20:16:30 GMT -8
Thanks for the heads up!
|
|
|
Post by SeaRat on Feb 12, 2024 19:04:58 GMT -8
I just found a couple of my dive logs from the early 1980s about the Snark III. I'll scan those and post them here a bit later. In one I made observations of the regulator "leaking" (which was actually water in the hose, and air from the exhaust valve due to pressure differences).
John
|
|
|
Post by SeaRat on Feb 13, 2024 13:00:01 GMT -8
|
|
|
Post by SeaRat on Feb 13, 2024 18:37:15 GMT -8
|
|